Rope Grab Fall arrester EIS-RG10

₹1.00

ISAFE® Rope Grab – Fall Arrester with Connector

Product Code: EIS-RG10

Product Description

The ISAFE® EIS-RG10 Rope Grab – Fall Arrester is a mechanical rope-grab device designed for use in compatible fall-protection systems for work at height. Manufactured with a metal body and supplied with a connector, it is designed to engage with a compatible vertical lifeline to help arrest a fall when correctly installed, oriented and used according to the manufacturer's instructions.

The device features a clearly marked UP direction to guide correct installation and is marked for use with a 14–16 mm rope. Its mechanical locking arrangement is intended to engage with the approved lifeline during a fall event. The connector allows attachment to compatible components of the fall-protection system.

The ISAFE® Rope Grab is suitable for consideration in construction, industrial maintenance and other work-at-height applications where a compatible rope-guided fall-arrest system is required.

Key Features

  • Rope-grab mechanism: Designed to engage with a compatible lifeline during a fall event.

  • 14–16 mm rope compatibility marking: Use only with rope types and diameters approved by the manufacturer.

  • Metal construction: Robust metal body for industrial use.

  • Integrated connector: Supplied with a connector for attachment to compatible system components.

  • Directional marking: UP arrow helps indicate the correct installation orientation.

  • Compact design: Practical for suitable rope-based fall-protection applications.

  • ISAFE® branding: Product identification markings on the device.

Technical Specifications

Specification

Details

Brand

ISAFE®

Product Name

Rope Grab – Fall Arrester

Product Code

EIS-RG10

Material

Alloy steel, as recorded in the supplied test report

Rope Diameter

14–16 mm

Breaking Strength

15 kN, as recorded in the reference certificate

Breaking Force

Less than 6 kN, as recorded in the reference certificate

Breaking Mechanism

Stainless steel and bronze, as recorded

Approximate Weight

900 g, as recorded in the reference certificate

Temperature Range

−30°C to +50°C, as recorded in the reference certificate

Referenced Standard

EN 353-2:2002, as marked on the supplied product/certificate

Technical values and standard references are reproduced from the supplied product markings and reference test report. Confirm them against current manufacturer documentation and valid conformity records before relying on them for compliance.

Applications

  • Construction and infrastructure work

  • Industrial plant maintenance

  • Work-at-height inspection activities

  • Suitable vertical-lifeline fall-protection systems

  • Other approved industrial applications, subject to risk assessment and system compatibility

Safe Use and Inspection

Before each use, inspect the rope grab, connector, locking mechanism and identification markings for damage, deformation, corrosion or abnormal operation. Confirm the rope type, diameter and installation direction against the manufacturer's instructions. The complete fall-protection system must be assessed for compatibility, anchorage suitability, required fall clearance and rescue arrangements.

Use only by trained personnel. Remove the device from service after a fall event, suspected overload, damage or failed inspection, and follow the manufacturer's assessment and replacement instructions.

Important: This product is a component of a fall-protection system, not a complete system by itself. Verify certification and conformity documentation before use.

Why Choose ISAFE®?

ISAFE® focuses on practical industrial safety equipment for workplaces where reliable fall protection is essential. Choose the EIS-RG10 Rope Grab for compatible rope-based fall-protection applications, supported by appropriate inspection, training and system selection.

ISAFE® — Makes You Safer

Website: www.isafeproducts.com
Email: connect@ehsindiaservices.com